helmete ea tjheseletsa ea moea e hloekisang moea + AIRPR TN350-ADF9120) Setšoantšo se Nchafatsoang

helmete ea ho tjheseletsa moea e hloekisang moea + AIRPR TN350-ADF9120)

Sesebelisoa sa Sehlahisoa:

Helmete ea tjheseletsa e nang le phepelo ea moea, e tsejoang hape e le "powered air purifying respirator" (PAPR), e sebetsa ka ho fana ka moea o sefiloeng o sa khaotseng ho ea e roetseng ha e ntse e sireletsa mahlo a bona le sefahleho nakong ea ts'ebetso ea ho cheselletsa.

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Lintlha-khōlō tsa sehlahisoa
♦ Sistimi ea TH2P
♦ Sehlopha sa Optical : 1/1/1/2
♦ Tokiso ea kantle bakeng sa yuniti ea phepelo ea moea
♦ Ka litekanyetso tsa CE

Parameter ea lihlahisoa

Tlhaloso ea Helmete		Tlhaloso ea Sephefumolohi
• Moriti o Khanyang	4	• Litefiso tsa Phallo ea Liyuniti tsa Sephala	Mohato 1 >+170nl/min, Mohato 2 >=220nl/min.
• Optics Quality	1/1/1/2	• Nako ea Ts'ebetso	Boemo ba 1 10h, Boemo ba 2 9h; (boemo: mocheso oa kamore e ncha ea betri e qositsoeng ka botlalo).
• Mefuta e fapa-fapaneng ea Moriti	4/5 - 8/9 – 13, Boemo ba ka ntle	• Mofuta oa Leshala	Li-Ion Rechargeable, Cycles>500, Voltage/Capacity: 14.8V/2.6Ah, Nako ea ho Chaja: approx. 2.5h.
• Sebaka sa ho shebella sa ADF	98x88mm	• Bolelele ba Hose ea Moea	850mm (900mm ho kenyeletsoa lihokelo) tse nang le letsoho le sireletsang. Diameter: 31mm (ka hare).
• Li-sensor	4	• Mofuta oa Sesefa se Hloahloa	TH2P R SL bakeng sa tsamaiso ea TH2P (Europe).
• Tšireletso ea UV/IR	Ho fihlela ho DIN 16	• Tekanyetso	EN12941:1988/A1:2003/A2:2008 TH3P R SL.
• Boholo ba Cartridge	114x133×10cm	• Boemo ba Lerata	<=60dB(A).
• Matla a Solar	1x betri ea lithium e ka nkeloang sebaka ke CR2450	• Boitsebiso	PC + ABS, Blower bolo ea boleng bo holimo e nang le enjene ea bophelo bo bolelele ba brushless.
• Taolo ea kutlo	Tlase ho ea Holimo, tlhophiso ea Kantle	• Boima ba 'mele	1097g (ho kenyeletsoa Sefe le Betri).
• Mosebetsi Kgetha	ho tjheseletsa, ho seha, kapa ho sila	• Boemo	224x190x70mm (ka ntle boholo).
• Lense Switching Speed (motsotsoana)	1/25,000	• Mmala	Botsho/ Bohlooho
• Lieha Nako, Lefifi ho ea Leseling (metsotsoana)	0.1-1.0 e fetohang ka botlalo, Setlhophiso sa kantle	• Tlhokomelo (fetola lintho tse ka tlase khafetsa)	Sesefa se Sebeletsoeng sa Carbon: hang ka beke haeba u se sebelisa lihora tse 24 ka beke; H3HEPA Sefe: hang libeke tse 2 haeba u se sebelisa lihora tse 24 ka beke.
• Thepa ea Helmete	PA
• Boima ba 'mele	500g
• Tlase TIG Amps Rated	> 5 amps
• Boemo ba Mocheso (F) Ts'ebetso	(-10℃--+55℃ 23°F ~ 131°F)
• Ho holisa Lense ea Matla	Ee
• Setifikeiti	CE
• Tiisetso	lilemo tse 2

Phefumoloho e Hloekisang Moea e Matla (PAPR) Helmete ea Welding AIRPR TN350-ADF9120: Ho netefatsa polokeho le boiketlo tikolohong ea tjheseletsa

Welding ke ts'ebetso e mahlonoko ho liindasteri, empa e tla le likotsi tsa eona, haholo tse amanang le bophelo bo botle ba ho hema. Li-welders li lula li pepesetsoa mosi, likhase le lintho tse itseng, tse ka bakang likotsi tse tebileng tsa bophelo bo botle. Ho fihlela sena, indasteri ea li-welding e entse tsoelo-pele e kholo ho lisebelisoa tsa ts'ireletso ea motho (PPE), ho kenyeletsoa le nts'etsopele ea lihelmete tsa ho hema. E 'ngoe ea boqapi bo joalo keHelmete ea tjheseletsa e nang le matla a ho hloekisa moea (PAPR)., e kopanyang ts'ebetso ea helmete ea welding le tsamaiso e kopanetsoeng ea phepelo ea moea ho fana ka li-welders ka moea o hloekileng, o hloekileng. Sengoliloeng sena se shebisisa ka botebo likarolo, melemo, le bohlokoa ba lihelmete tsa tjheseletsa tsa PAPR ho netefatsa polokeho le boiketlo ba li-welders.

Tlhokahalo ea ts'ireletso ea phefumoloho nakong ea welding

Mokhoa oa ho tjheseletsa o hlahisa mefuta e mengata ya ditshila tsa moya, ho kenyeletswa mosi wa tshepe, digase le mouwane, tse ka bang kotsi ha di hema. Ho pepesehela lintho tsena tse kotsi ka nako e telele ho ka baka mathata a ho hema a kang ho senyeha ha matšoafo, ho teneha ho phefumoloha, le mathata a nako e telele a bophelo bo botle. Ho feta moo, tjheseletso libakeng tse koaletsoeng kapa tse nang le moea o fokang hantle ho ka mpefatsa likotsi tse amanang le litšila tse tsamaisoang ke moea. Ka hona, li-welders li tlameha ho nka mehato e sebetsang ea ts'ireletso ea phefumoloho ho sireletsa bophelo ba bona ha ba ntse ba sebetsa.

Launch ofHelmete ea tjheseletsa e nang le matla a ho hloekisa moea (PAPR).

ThePAPR maske oa tjheseletsake tharollo e tsoetseng pele e etselitsoeng ho sebetsana le likotsi tsa ho hema li cheseletsa. Karolo ena e ncha ea lisebelisoa tsa ts'ireletso ea motho e kopanya ahelmete e tjheseletsang e nang le sehemuwa se matla se hloekisang moya, ho theha tsamaiso e pharaletseng e sa sireletseng feela mahlo le sefahleho sa welder, empa hape e fana ka phepelo e tsoelang pele ea moea o phefumolohang o hloekileng, o tlhotliloeng. Ho kenyelletsoa ha lisebelisoa tsa PAPR ho lihelmete tsa ho cheselletsa ho tiisa hore li-welders li sirelelitsoe ho likaroloana tse kotsi le likhase tse moeeng, kahoo li fokotsa kotsi ea mafu a amanang le ho hema.

Lintlha tsa Bohlokoa le Melemo eaPAPR Welding Helmets

1. Tšireletso e pharaletseng ea phefumoloho: Mosebetsi o ka sehloohong oa helmete ea ho tjheseletsa PAPR ke ho fana ka tikoloho e sireletsehileng ea ho phefumoloha bakeng sa li-welders ka ho tsoela pele ho fana ka moea o hloekisitsoeng. Karolo ena e fokotsa haholo ho hema mosi oa welding le lintho tse ling tse silafatsang moea, ho ntlafatsa bophelo bo botle ba ho hema.

2. Matšeliso a Ntlafetseng le Ponahalo: Lihelmete tsa ho tjheseletsa PAPR li etselitsoe ho fana ka matšeliso a phahameng le ponahalo nakong ea ts'ebetso ea welding. Mokhoa o kopanetsoeng oa phepelo ea moea o thusa ho boloka moea o tsitsitseng o ntse o tsoela pele 'me o thibela mocheso le mongobo ka har'a helmete. Sena le sona se fokotsa moholi le ho netefatsa ponahalo e hlakileng, e lumellang li-welders ho sebetsa ka nepo le ka nepo.

3. Ho feto-fetoha ha maemo le ho ikamahanya le maemo:Lihelmete tse chesehang tsa PAPRli fumaneha ka meralo le litlhophiso tse fapaneng ho ikamahanya le lits'ebetso le tikoloho e fapaneng. Ebang ke MIG, TIG kapa stick welding, lihelmete tsena li ka etsoa ho latela litlhoko tse khethehileng tsa welder, ho netefatsa tšireletso le ts'ebetso e nepahetseng lits'ebetsong tse fapaneng.

4. Phokotso ea lerata: Lihelmete tse ling tsa tjheseletsa tsa PAPR li na le ts'ebetso ea ho fokotsa lerata, e thusang ho fokotsa ts'ebetso ea ts'ebetso e phahameng ea ho tjheseletsa ha motho a utloa. Ka ho kenyelletsa theknoloji ea ho fokotsa lerata, lihelmete tsena li thusa ho theha sebaka sa mosebetsi se sireletsehileng le se phutholohileng haholoanyane.

5. Bophelo ba betri ea nako e telele: Sesebelisoa sa PAPR se helmete ea welding se tsamaisoa ke betri e nchafalitsoeng, e fanang ka nako e telele ea ho sebetsa ho tšehetsa mesebetsi ea nako e telele ea welding. Sena se tiisa hore li-welders li ka itšetleha ka tšireletso e sa sitisoeng ea phefumoloho nakong eohle ea tsona.

Bohlokoa ba Lihelmete tsa ho Welding tsa PAPR ho Khothaletsa Polokeho Mosebetsing

Kenyelletso ea helmete ea tjheseletsa ea PAPR e emela tsoelo-pele e kholo ea polokeho ea mosebetsi indastering ea litšepe. Lihelmete tsena li phetha karolo ea bohlokoa ho sireletseng bophelo ba litšepe ka ho sebetsana le likotsi tsa ho hema ka katleho. Ho feta moo, ho kopanya tšireletso ea phefumoloho ka helmete ea ho cheselletsa ho felisa tlhoko ea sephefumolohi se arohaneng, ho nolofatsa litlhoko tsa PPE bakeng sa ts'ebetso ea welding le ho ntlafatsa boiketlo ba basebetsi ka kakaretso.

Ho phaella tabeng ea ho sireletsa motho ka mong, lihelmete tsa PAPR li fokotsa ho ata ha mosi o kotsi le lintho tse nyenyane, e leng se etsang hore ho be le sebaka se sireletsehileng sa mosebetsi. Sena ha se ruise sechesele molemo feela, se boetse se fokotsa tšusumetso e ka bang teng ho ba ba potileng, ho khothaletsa sebaka sa mosebetsi se phetseng hantle le se tšoarellang.

Tlhaloso ea Sehlahisoa: Ho Khetha Helmete e Nepahetseng ea Welding ea PAPR

Ha u khetha helmete ea ho tjheseletsa ea PAPR, lintlha tse 'maloa li tlameha ho nahanoa ho netefatsa hore mohlala o khethiloeng o kopana le litlhoko le likhetho tse khethehileng tsa moetsi oa litšepe. Lintlha tsa bohlokoa li kenyelletsa boemo ba tšireletso ea phefumoloho e fanoeng, moralo le boima ba helmete, bophelo ba betri le ho lumellana le mekhoa e fapaneng ea ho tjheseletsa.

Ho feta moo, ho lekola bokhoni ba ho sefa le sekhahla sa phallo ea moea ea yuniti e kopaneng ea PAPR ho bohlokoa ho lekola bokhoni ba helmete ea ho fana ka moea o hloekileng, o phefumolohang. Ho feta moo, likarolo tse kang litlhophiso tse feto-fetohang tsa phallo ea moea, mabanta a hlooho ea ergonomic, le lithebe tsa sefahleho tse hlakileng, tse nang le tšusumetso e phahameng li bohlokoa ho holisa boiketlo le polokeho nakong ea mesebetsi ea ho cheselletsa.

Ka bokhutšoanyane, lihelmete tsa ho tjheseletsa tse hloekisang moea (PAPR) li emela tsoelo-pele e kholo ts'ireletsong ea phefumoloho bakeng sa li-welders. Ka ho kopanya ts'ebetso ea helmete ea ho tjheseletsa le sistimi e kopaneng ea phepelo ea moea, lihelmete tsa PAPR li fana ka tharollo e felletseng ea ho fokotsa likotsi tsa phefumoloho tse amanang le welding. Ha indasteri ea licheso e ntse e tsoela pele ho beha bophelo bo botle le polokeho ea basebetsi ba eona pele, ho amoheloa ha lihelmete tsa PAPR ho tla fetoha tloaelo e tloaelehileng, ho netefatsa hore li-welders li ka etsa mesebetsi ea tsona ka kholiseho, matšeliso le tšireletso e nepahetseng ea phefumoloho.

E fetileng: Auto dark welding lens / Welding safety lens

E 'ngoe: maske oa ho tjheseletsa ho phefumoloha/maske wa welding le sehemuwa +AIRPR TN350-ADF9120)

Ngola molaetsa wa hao mona mme o re romele wona